Measuring for Roman blinds:
Please note: You should always use a metal tape measure
RECESS
GIve us the tight measurement and we will make the operating allowances
Measure accross the top, middle and bottom and give the narrowest width.
If you have tiles half way down measure between them.
Drop = C - D
Measure the sides and middle
OUTSIDE RECESS
This is the actual size you ant the blind to be made.
Overlap the recess by approximately 25mm to 50mm either side to suite your requirements IE: allowing for any obstructions.
Drop = G - H
Measure from approximately 125mm above the recess down to the point where you want the Blind to finish.
For other measurements IE: Doors, shaped or sloping windows, please contact us.
Telehone: 01252 544 568
Please note: The stacking depth of a Roman blind when fully up is approximately 250mm (9"). This will vary according to the drop and the spacing of the folds.
Please remember there are two headrail versions available: Traditional » and Sidewinder»